document number: 94538 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 10-mar-10 1 three phase bridge (power module), 45 a to 100 a 40mt1.0p.pbf, 70mt1.0p.pbf, 100mt1.0p.pbf series vishay high power products features ?low v f ? low profile package ? direct mounting to heatsink ? flat pin/round pin versions with pcb solderable terminals ? low junction to case thermal resistance ? 3500 v rms insulation voltage ? ul approved file e78996 ? compliant to rohs directive 2002/95/ec ? designed and qualified for industrial level applications ? power conversion machines ?welding ?ups ?smps ? motor drives ? general purpose and heavy duty application description a range of extremely compact three-phase rectifier bridges offering efficient and reliabl e operation. the low profile package has been specifically conceived to maximize space saving and optimize the electrical layout of the application specific power supplies. product summary i o 45 a to 100 a mt...pa mt...pb major ratings and characteristics symbol characteristics 40mt 70mt 100mt units i o 45 75 100 a t c 100 80 80 c i fsm 50 hz 270 380 450 a 60 hz 280 398 470 i 2 t 50 hz 365 724 1013 a 2 s 60 hz 325 660 920 i 2 t 3650 7240 10 130 a 2 s v rrm 1400 to 1600 v t stg range - 40 to 125 c t j - 40 to 150
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 94538 2 revision: 10-mar-10 40mt1.0p.pbf, 70mt1.0p.pbf, 100mt1.0p.pbf series vishay high power products three phase bridge (power module), 45 a to 100 a electrical specifications voltage ratings type number voltage code reverse voltage v v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak v i rrm maximum at t j = 150 c ma 40mt140p, 70mt140p, 100mt140p 140 1400 1500 5 40mt160p, 70mt160p, 100mt160p 160 1600 1700 forward conduction parameter symbol test conditions 40mt 70mt 100mt units maximum dc output current at case temperature i o 120 rect. to conduction angle 45 75 100 a 100 80 80 c maximum peak, one cycle forward, non-repetitive on state surge current i fsm t = 10 ms no voltage reapplied initial t j = t j maximum 270 380 450 t = 8.3 ms 280 398 470 t = 10 ms 100 % v rrm reapplied 225 320 380 t = 8.3 ms 240 335 400 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 365 724 1013 a 2 s t = 8.3 ms 325 660 920 t = 10 ms 100 % v rrm reapplied 253 512 600 t = 8.3 ms 240 467 665 maximum i 2 t for fusing i 2 t t = 0.1 ms to 10 ms, no voltage reapplied 3650 7240 10 130 a 2 s value of threshold voltage v f(to) t j maximum 0.78 0.82 0.75 v slope resistance r t 14.8 9.5 8.1 m maximum forward voltage drop v fm t j = 25 c; t p = 400 s single junction (40mt, i pk = 40 a) (70mt, i pk = 70 a) (100mt, i pk = 100 a) 1.45 1.45 1.51 v insulation table parameter symbol test conditions 40mt 70mt 100mt units rms insulation voltage v ins t j = 25 c, all termin al shorted, f = 50 hz, t = 1 s 3500 v thermal and mechanical specifications parameter symbol test cond itions 40mt 70mt 100mt units maximum junction operating temperature range t j - 40 to 150 c maximum storage temperature range t stg - 40 to 125 maximum thermal resistance, junction to case r thjc dc operation per module 0.27 0.23 0.19 k/w dc operation per junction 1.6 1.38 1.14 120 rect. condunction angle per module 0.38 0.29 0.22 120 rect. condunction angl e per junction 2.25 1.76 1.29 maximum thermal resistance, case to heatsink per module r thcs mounting surface smooth, flat and greased heatsink compound therma l conductivity = 0.42 w/mk 0.1 mounting torque to heatsink 10 % a mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. lubricated threads 4nm approximate weight 65 g
document number: 94538 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 10-mar-10 3 40mt1.0p.pbf, 70mt1.0p.pbf, 100mt1.0p.pbf series three phase bridge (power module), 45 a to 100 a vishay high power products fig. 1 - current rating characteristics fig. 2 - on-state voltage drop chracteristics fig. 3 - maximum non-re petitive surge current fig. 4 - maximum non-re petitive surge current clearance and creepage distances parameter test conditions mt...pa mt...pb units clearance external shortest distance s in air between terminals which are not internally short circuited together 10.9 12.3 mm creepage distance shortest distance along external surface of the insulating material between terminals which are not in ternally short ci rcuited together total output current (a) maximum allowable case temperature (c) 80 90 100 110 120 130 140 150 160 01020304050 120? (rect) 40mt...p r (dc) = 0.27 k/w per module thjc instantaneous on-state current (a) instantaneous on-state voltage (v) 1 10 100 1000 0123456 tj = 150?c tj = 25?c 40mt...p number of equal amplitude half cycle current pulses (n) peak half sine wave on-state current (a) 50 100 150 200 250 110100 at any rated load condition and with rated vrrm applied following surge. initial tj = 150?c @ 60 hz 0.0083 s @ 50 hz 0.0100 s 40mt...p per junction pulse train duration(s) peak half sine wave on-state current (a) 50 100 150 200 250 300 0.01 0.1 1 maximum non repetitive surge current versus pulse train duration. control of conduction may not be maintained. initial t j = 150?c no voltage reapplied rated v rrm reapplied 40mt...p per junction
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 94538 4 revision: 10-mar-10 40mt1.0p.pbf, 70mt1.0p.pbf, 100mt1.0p.pbf series vishay high power products three phase bridge (power module), 45 a to 100 a fig. 5 - current rating nomo gram (1 module per heatsink) fig. 6 - current rating characteristics fig. 7 - on-state voltage drop characteristics fig. 8 - maximum non-re petitive surge current fig. 9 - maximum non-re petitive surge current maximum allowable ambient temperature (c) total output current (a) maximum total power loss (w) 0 30 60 90 120 150 rthsa = 0.1 k/w - delta r 0.3 k/w 0.4 k/w 0.5 k/w 1 k/w 0.2 k/w 0 50 100 150 200 250 0 102030405060 120? (rect) tj = 150?c 40mt...p total output current (a) maximum allowable case temperature (c) 60 70 80 90 100 110 120 130 140 150 160 0 1020304050607080 120? (rect) 70mt...p r (dc) = 0.23 k/w per module thjc instantaneous on-state current (a) instantaneous on-state voltage (v) 1 10 100 1000 012345 tj = 150?c tj = 25?c 70mt...p number of equal amplitude half cycle current pulses (n) peak half sine wave on-state current (a) 100 150 200 250 300 350 110100 at any rated load condition and with rated vrrm applied following surge. initial tj = 150?c @ 60 hz 0.0083 s @ 50 hz 0.0100 s 70mt...p per junction pulse train duration(s) peak half sine wave on-state current (a) 50 100 150 200 250 300 350 400 0.01 0.1 1 maximum non repetitive surge current versus pulse train duration. control of conduction may not be maintained. initial t j = 150?c no voltage reapplied rated v rrm reapplied 70mt...p per junction
document number: 94538 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 10-mar-10 5 40mt1.0p.pbf, 70mt1.0p.pbf, 100mt1.0p.pbf series three phase bridge (power module), 45 a to 100 a vishay high power products fig. 10 - current rating nomo gram (1 module per heatsink) fig. 11 - current rating characteristics fig. 12 - on-state voltage drop characteristics fig. 13 - maximum non- repetitive surge current fig. 14 - maximum non- repetitive surge current maximum allowable ambient temperature (c) total output current (a) maximum total power loss (w) 0306090120150 rths a = 0.1 k/w - delta r 0.3 k/w 0.4 k/w 0.5 k/w 1 k/w 0.2 k/w 0 50 100 150 200 250 300 020406080 120? (rect) tj = 150?c 70mt...p total output current (a) maximum allowable case temperature (c) 40 60 80 100 120 140 40 50 60 70 80 90 100 110 120 130 120? (rect) per module 100mt...p r (dc) = 0.19 k/w thjc instantaneous on-state current (a) instantaneous on-state voltage (v) 1 10 100 1000 0.5 1 1.5 2 2.5 3 3.5 4 tj = 150?c tj = 25?c 100mt...p number of equal amplitude half cycle current pulses (n) peak half sine wave on-state current (a) 100 150 200 250 300 350 400 110100 at any rated load condition and with rated vrrm applied following surge. initial tj = 125?c @ 60 hz 0.0083 s @ 50 hz 0.0100 s 100mt...p per junction pulse train duration(s) peak half sine wave on-state current (a) 0 50 100 150 200 250 300 350 400 450 500 0.01 0.1 1 10 maximum non repetitive surge current versus pulse train duration. control initial t j = 125?c no voltage reapplied rated v rrm reapplied of conduction may not be maintained. 100mt...p per junction
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 94538 6 revision: 10-mar-10 40mt1.0p.pbf, 70mt1.0p.pbf, 100mt1.0p.pbf series vishay high power products three phase bridge (power module), 45 a to 100 a fig. 15 - current rating nomogram (1 module per heatsink) fig. 16 - thermal impedance z thjc characteristics maximum allowable ambient temperature (c) total output current (a) maximum total power loss (w) 0306090120150 0.05 k/w rthsa = 0.025 k/w - delta r 0.5 k/w 1 k / w 0.3 k/ w 0.2 k/w 0.1 k/w 0 100 200 300 400 500 020406080100 120? (rect) tj = 150?c 100mt...p square wave pulse duration (s) transient thermal impedance z thjc (k/w) 0.01 0.1 1 10 0.0001 0.001 0.01 0.1 1 10 steady state value rthjc per junction = 1.6 k/w (40mt...p) 1.38 k/w (70mt...p 1.14 k/w (100mt...p) dc operation) 40mt...p 70mt...p 100mt...p
document number: 94538 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 10-mar-10 7 40mt1.0p.pbf, 70mt1.0p.pbf, 100mt1.0p.pbf series three phase bridge (power module), 45 a to 100 a vishay high power products ordering information table circuit configuration 1 - current rating code 2 - circuit configuration code: 0 = 3-phase rectifier bridge 3 - essential part number 4 - voltage code x 10 = v rrm (see voltage ratings table) 5 - pinout code 4 = 45 a 7 = 75 a 10 = 100 a 6 - lead (pb)-free a = flat pins b = round pins device code 5 13 24 6 10 0 mt 160 p b pbf links to related documents dimensions www.vishay.com/doc?95244
document number: 95244 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 07-nov-07 1 mtp flat and round pin outline dimensions vishay semiconductors dimensions for mtp with flat pin in millimeters 4 2.5 42 0.1 7 14 2 44.5 7 7 7 7 7.4 ? 5.2 (x 2) 4 3 2 1 5 7 1.3 14 14 39.5 48.7 63.5 0.25 32.5 0.5 27.5 22 22 0.5 5.5 ? 5 16 12 0.5 10.5 5.5 0.5 electrical circuit 3, 4 5 6 7 1, 2 6 12
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 95244 2 revision: 07-nov-07 outline dimensions vishay semiconductors mtp flat and round pin dimensions for mtp with round pin in millimeters 44.5 32.5 0.1 27.5 22 1.3 14 14 39.5 48.7 63.5 0.25 electrical circuit 3, 4 5 6 7 1, 2 7 7 7 7 4 3 2 1 5 7 ? 5.2 (x 2) 7.4 10.5 4 ? 5 ? 1.1 12 0.5 16 31.8 12 2.5 4 ? 5 14 7 7 6 20.5 0.1
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
